my old scrap

Thank-you Carlos

 

Haha man this car as the looks alright kevin roof is gloss black yes did mod the s53 gearbox to fit only cut out the whole with a wholesaw a 57mm and tapped the bolt holes went out and looked for a camry starter as you told me too all seems to be working perfectly.Thanks for the comments and help.

 

Steven thank you your majesty.

 

Wanting to find out who will have a ct20b turbo for me at a good price mine is stuffed.

 

I need help I cannot understand why my engine as now
Run bearings for the second time getting frustrated with
Motor or maybe get an 4aze to replace this with I only had
212 kw drove it a week had to remove it again

 

HI Kevin thanks
Kevin it damaged the no 4 rod big end and crank.
Mag rims are 17 inch 7j nice fit no rubbing what so ever.
Sorry I did not put pictures just to busy here are the full specs of the motor some will be
amazed with the specs but aiming at 300kw to the wheels @ 1.2 bar.
3sgte block from st185 bored at 87mm
300zx twin turbo pistons 87mm stock able to handle 550hp
stock rods 3sgte had to mod to fit piston onto it.
Knife edged stock crank and balanced
camry 5s oil pump
T3/T4 turbo
turbo branch made with 40mm bends at shalks racing
external waste gate tail
50mm tail dump valve
exhaust free flow all the way to the rear 76mm with a tail piece of 120mm deap noise love it.
cyl head stock mild cams cut 272deg
injectors stock from a supra light blue 540cc but running at 600cc @ 4bar
Fuel pressure reg with ext clock
stock fuel rail.
walbro 255l in tank fuel pump
removed t-vis
gearbox still stock s53 and shafts not dis-appointed was thinking it was going to spin but happy
clutch its a four button type good grip with a stock re in-forced teeth on pressure plate.
stock fly wheel
piston rings are total seal expensive got them cheap lucky me
bearings are AE was told to use these because they are the only one's that have cooper in them who I am to argue I used the first time acl and did not lost but everyone there choice's do not want to comment when it comes to things like this.
I don't think i missed anything else
wait it made 212kw to the wheels and 353nm at .8bar

 

pictures:

 

thanks kevin
the tyre size is 205/40/17 front and rear make of rim evo
have to change rod no good anymore one of my friends found one from a beams
motor which is the same so luck on my side again
i will keep it posted when we finish motor again and have a another dyno run

 

HI all i have not been around this site for very long hope everyone is doing well.

 

Hi Mattc everything is fine car as well doing good,engine broke again the other day but have sorted it out.
Had small accident with it nothing major repairing it at this moment and changing color again lol this time red pearl
Oh yes i have another celica which i bought gen6 st202 for my son not a bad looking car as well but still prefer the st162
your car all still good i see on ads there in Australia these cars are so cheap just the laws you guys have there suck lol

 

hi there Kevin JHb is still ok i personally still prefer South africa to other places due to us being very much more free and not getting locked up for anything stupid lol
we can mod and so on but that is not what we are here for speak about each others country dont like politics yes i have bought 2x cars gen 6 St202 one with 3sge motor and other with 3sfe
one is from Lesotho and the other one is from Botswana.
and there are st182 around i had one the other day at my workshop for repairs with that a 7 gen one pitch up as well so there are but very little
and you guys any good news i see this site as gone very quite its sad man but the facebook one going strong i see
i will post pictures on facebook page i always have a struggle to post pics on this site