1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

trans finally came off

Discussion in 'Drivetrain' started by zak062, May 27, 2007.

  1. zak062

    zak062 Well-Known Member

    that dang trans finaly came off with ALOT of pulling and bitching. now when i was taking the pressure plate off , the clutch disk just fell so i dont know which way to put it on. Does the typing on the disk face the trans or engine?


    O, and does my flywheel need to be resurfaced?

    I noticed the new pressure plate has a smaller hole in it, does that really matter?
  2. underscore

    underscore Well-Known Member

    I believe the disk only fits in properly one way, it won't sit flat and wobble like a cheap stool if you've got it backwards.
  3. SpeedDemon

    SpeedDemon Well-Known Member

    The the side that sticks out goes away from the flywheel. It should only go on one way.lol

    If your clutch was as bad as you said it was. To were you can take the clutch out and it wont go anywere. Yes it does need to be resurfaced.

    No doesn't matter.
  4. Mafix

    Mafix Owner Staff Member Administrator Donated!

    the flywheel side is the side that has less protrusion for the spring pack. and yes your flywheel needs resurfacing. perks of AWD.

Share This Page