Ok the offcial Seat thread... Post pics of aftermarket seats... Im looking for a low profile lightweight seat...and cheap!
My seat is an Ultra-Sheild aluminum Ralley model with very thin padding, might not be the best set up for a street car but it is low, light, and affordable. This seat cost $219 with the cover, which is usually extra on a lot of seats. I'll post pictures of the seat and how mine is mounted, it will just be a day or so, cause I've got a managers meeting at the Speedway tommorrow evening. racerb 8)
Hey here are a few pics of my Ultra-Sheild race seat, and how I've got it installed. I didn't try to adapt it to stock seat rails but I'm sure it could probebly be done. racerb 8)
Thata a nice setup Racerb...... What seat mounting brackets did you use? Those actully look not too bad
Actually I made those myself, from some peices of 1/8" L-channel from my local Home Depot. With all my mounting hardware, cost me less than $25, Sparco and others wanted $50 and higher for basicly the same setup. I mounted this seat as close to the floor as the stock seat rail mounts would let me, almost touches the floor pan at the back edge. racerb 8)