Hi, i‘m not new in this forum, but havent done something interesting. But didnt find thread like this, so decided post some pictures about my home made rear strut bar. Now its two point, but soon it will be tree point stut bar.
Nice work, that would go nicely with my custom rear camber plates I made for my car... http://smg.photobucket.com/user/racerb/media/GTS Race Mods/CelicaModsUpdate005.jpg.html?sort=3&o=48 racerb :science
I can‘t tell, because the car is under body repair (rust removing), but think it will be noticeably better, coz the rear strut towers in our cars is really weak. In winter i rebuild the engine, now it has 2gen 3sge bottom (92‘ 3sge with piston oil nozzles), fully rebuild head.
Add third point to strut brace: Measured and aligned: and final result : P.S. sorry for picrures qality, my phone camera is :banghead
I will not be able to build the exact same tower brace since my car is a coupe, but will most likely use the rear legs of my roll cage as the tower support..... Not easy to see in this picture, but the rear cage supports attach to the strut towers so I'm just going to add a cross bar between them.... http://smg.photobucket.com/user/rac...=3&o=94&_suid=1367092053593030085771179993076 racerb
So, just pass MOT (after 5years ) and about difference, it’s really big !!! with my stock (not for long) suspension setup, and st182 gti rear sway bar (17mm) now the car handles much better, car feels like it’s going on rails. Recommend this mod.