have a bunch of stuff I'd like to get rid of. I'm trying to clean up my inventory and make room for some new arrivals. Let me know if you're interested in any of this stuff: SW20 MR2 TRD Metal Head Gasket PTR04-17910-01 (11115-SW201) $84.40 SW20 93-97 MR2 TRD Plug Wires PTR04-17920-02 (19051-ST811) (should work for all 2nd Gen 3sGTEs as well, CMIIR) $136.05 ST162 JDM Parking Lights (pre & post facelift) $65.00 ST185 JDM Fog Lights (post facelift yellow lenses) $75.00 ST18X Cooling Panel 53292-20050 ST165 JDM Mirrors $75.00 ST165 JDM Rear Vents ST184 USDM Mirrors $30.00 ST202/4 Tranny Mount 12372-74451 (S54) $74.17 ST202/4 Rear Mount 12371-74411 (S54) $49.03 ST202/4 Rear Bracket 12321-74321 (S54) $34.32 ST202/4 Timing Side Bracket #1 12315-74130 $77.66 ST202/4 Timing Side Bracket #1 Bolts (3) 90119-10599 $3.72 ST202/4 Timing Side Bracket #2 12316-74070 $31.74 ST202/4 Timing Side Stabilizer 12381-74020 $9.49 ST162 USDM/JDM Rear Taillights (post facelift) $100.00 ST162 Misc Parts (tons and tons) Universal TRD Leather Shift Knob PTR04-00000-05 (33504-SP003) $65.00 SW20 Black Leather Shift Boot 58808-17031 $10 (not great condition, couple of small holes from wear) ST165 Whiteline Heavyduty Front Swaybar (BKIB, these are out of production) $200 ST202 3SGE OEM Exhaust Manifold (4-2-1, should work for all you 5SFE folks) $65 More to come.....
are the rear vent the tail light vents? If so id be interested in those how much are they. I may also be interested in the trd shift knob. is the standard looking shift knob or the round ball one?
Sleeper, I do have rear vent taillights. They are the standard post facelift JDM version. Also the shift knob can be googled since I included the part number. You can see if it suits your style that way.
Do you possibly have an ST162 front right camber adjust cam? The one that goes on the upper mounting hole of the hub. This one: http://www.toyodiy.com/parts/p_E_1987_T ... l?hl=48194
-stupid question. i have a pre car with the homemade post conversion (like that when i bought it.) so if i want the jdm corners should i use the post, or mod a set of pre's? -ill also look at what what is on. -condition of shift knob? -will the sw20 shift boot fit a 162? -need the lower hatch interior piece (black). the bottom piece on the hatch itself.
List it here so I can answer here. That way someone else doesn't ask the same question. Wagner....the shift knob is unused. The MR2 boot might fit if you remove the plastic trim from it and then fit it in the center console trim of the ST162. Also, what color is your interior? About the corners....I'm not sure what the best way to go is. I'd lean toward getting the pre's since you know it will work after modding them. Lion, I don't have that part for you. Sorry
Happen to have some shifter linkage for a 162/165/etc? Not the one that goes in the trans but the one to the side that bolts to the top of the transmission.