hello everyone, i was wondering does anyone know how to rewire the a dual filament bulb setup on the usdm to a separate signal light and running light? cause i just picked up a pair and it looks weird without me changing it
yeah check out how i made my tops just turn signals.....i believe its all in my build thread, if not just pm me and ill send ya the photos....its pretty easy tho.
Yeah when I get home or u can search the "ur 4th gen" forum for it...its titled flat liner and should be within the first 3 pages
ok i was sure it was in there, its not really a write up, just some pics of how i made the top my turn signals, you would then set it up like that or vis versa and get both of them working at the same time..... cant even find the pics anymore....
there's one ground and two leads from the stock wiring. use the ground and connect them to both bulbs on the jdm corners. find which lead from the stock wiring is for the turn signals by hooking up one line to positive side of the bulb that you want to use as your turn signals. once you find out which lead is for the turn signals, use the other lead and connect that to the upper part of the corners. that would allow you to turn on the upper portion with the parking lights, however if you want to use it as a drl, you have to connect a 12v line that turns on with the car to that bulb (fused of course), an example is the cigarette lighter, always on at 12v when car is on.
