vaccum line

Discussion in 'Diagnosis/Help' started by Toytuner, Jun 18, 2008.

  1. Toytuner

    Toytuner Well-Known Member Donated!

    Nick
    88 alltrac
    JDM 3sgte

    so i found a vaccum line on my intake manifold thats just chillin, un hooked. it comes out on the drivers side. right where the bend in the manifold goes into the head. the little markings on it say # *.
    Sorry i dont have pics but does anyone know what im talking about?heres my shot at making a diagram.
    [​IMG]
     
  2. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Well the only 1 I found so far with #* on it is up on the firewall

    [​IMG]

    There are als some #* hoses for the cruise control that come off the passenger side of the intake manifold.

    I'll look again on the drivers side but it pretty full of crap on that side.
     
  3. ST165-2765

    ST165-2765 Well-Known Member Donated!

    You want to know where this line goes :)

    [​IMG]
     
  4. ST165-2765

    ST165-2765 Well-Known Member Donated!

    [​IMG]
    Well I have no idea what it is but it looks like it goes to the round thing pointed to by the green arrow. The line you want (#*) is indicated by the green line. The red line is a second line coming from the round thing. Your green line (#*) goes into the bottom connector of the round thing.

    [​IMG]
    The round thing is pretty much dirrectly under the distributor. About the diameter of a spray can cap perhaps a little smaller.
     
  5. zak062

    zak062 Well-Known Member

    I hope these help, if u need more, just ask

    [​IMG]
    [​IMG]
     
  6. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Thanks zak062 thats the thing. Any idea what that blue thing is ? Where does the vac hose on the right go to?
     
  7. Toytuner

    Toytuner Well-Known Member Donated!

    zak has the right pic but there is another line next to the 1 on the intake
     
  8. zak062

    zak062 Well-Known Member

    Blue/purple thingy is for iirc tvis. There are definatly no other lines on the side of the intake mani. take a look at the pics

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  9. Toytuner

    Toytuner Well-Known Member Donated!

    you dfont have the 2nd line on your intake heres a pic i took with my phone sorry for the crappy quality.[​IMG]
     
  10. Toytuner

    Toytuner Well-Known Member Donated!

    any ideas anyone?
     
  11. zak062

    zak062 Well-Known Member

    no, dont u have a jdm motor?
     
  12. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Are you sure it's attached to the intake both my intakes and zak062 only have 1 hose on that side.

    [​IMG]

    [​IMG]
     
  13. Toytuner

    Toytuner Well-Known Member Donated!

    ya its a jdm motor and it is attached to the intake. Damn this car and its starnge hoses and wires that shouldnt exist.
     
  14. Toytuner

    Toytuner Well-Known Member Donated!

    heres a better pic[​IMG]
    and some more of the new turbo timer and wheels
    [​IMG]
    [​IMG]
     
  15. zak062

    zak062 Well-Known Member

    fuck it, just cap the damn thing
     
  16. ST165-2765

    ST165-2765 Well-Known Member Donated!

    :wtg:
     
  17. Toytuner

    Toytuner Well-Known Member Donated!

    i guess the #* marking on the hose means its an accessory. So im just gonna cap it off.
     
  18. rye

    rye Well-Known Member Donated!

    haha

    also

    we need some members from Japan here I think....they could answer these questions for us....
     
  19. ST165-2765

    ST165-2765 Well-Known Member Donated!

    And get us some sweet parts.....
     
  20. Toytuner

    Toytuner Well-Known Member Donated!

    yeah for sure! Dammit i wish i had just put the USDM intake on it.
     

Share This Page