/ Register

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

temp gauge sender

Discussion in 'Diagnosis/Help' started by jon_gt4, Jun 12, 2009.

  1. jon_gt4

    jon_gt4 Active Member

    To save me looking it up, can someone confirm which sensor on the coolant elbow is the one for the dash gauge? Mine is misbehaving so I guess it needs a bit of cleaning up.
     
    jon_gt4, Jun 12, 2009
    #1
  2. Alwayzsidewayz

    Alwayzsidewayz ST162 Guru Donated!

    it should be the one with the simple push on spade connection rather than a dedicated connector.
     
    Alwayzsidewayz, Jun 12, 2009
    #2
  3. Mafix

    Mafix Owner Staff Member Administrator Donated!

    yep one wire spade
     
    Mafix, Jun 13, 2009
    #3
  4. jon_gt4

    jon_gt4 Active Member

    Thanks chaps, cleaned the connector up and the needle is solid again (was appearing to overcool under engine load).

    Jon
     
    jon_gt4, Jun 15, 2009
    #4
  5. Stig

    Stig ST162 Guru Donated!

    Just for reference sake

    [​IMG]
     
    Stig, Jun 17, 2009
    #5
  6. eNtraxGT88

    eNtraxGT88 Well-Known Member Donated!

    -necroposting-
    does someone have a picture for FE temp sender? i think i've got the right one, but when i bought a replacement, it seems that i've gotten the 5s-fe temp sender...
     
    eNtraxGT88, Sep 7, 2011
    #6
  7. Stig

    Stig ST162 Guru Donated!

    Should'nt make any difference

    I've used GE senders on FE and visa versa
     
    Stig, Sep 7, 2011
    #7
  8. eNtraxGT88

    eNtraxGT88 Well-Known Member Donated!

    is there a picture somewhere? the replacement i got does not go into any of the holes in the coolant elbow in front of the distributor...
     
    eNtraxGT88, Sep 7, 2011
    #8

Share This Page

Welcome to our site! Please take a moment and Register today!