st162/5 and 3sge parts (Added more parts) throw me an offer.

st162/st202/3sge parts ( ECU, Koni shocks etc added) throw me an offer

Gathered a bunch of interior and exterior parts over the last 2 years plus parts from my old 3sge and some new parts. Gotta get this stuff out of here.


Rear Tail Lamps (Crack on the driver side, pm me for more photos)


USDM Rear Reflector Lights


ST202 Hood Hinges/Radiator supports, Horns, Hood Latch, Washer fluid Container, Coolant Container, Battery Stays/Tray, st162 Shifter


st202 coolant overflow bottle


Antenna Controler


st162/5 Interior switches/pieces


st162 Fuel Rail


st162/5 Cigarette Dispenser


3sge Dipstick


Rear Seatbelts (Liftback) and Brackets


st162 VSV



USDM Mirror holder


USDM Mirrors with Reflective Glass (Red...ish)


"Momo" Steering wheel w/ Momo horn button


Standard Type w/ Celica GT-S Horn


Koni front shocks and struts


Napa brand rear shocks


3sge ECU


3sge Manual Shift lever


Blue Center Console



Hatchback Tail light covers and Tool /Jack Cover (Blue).


st162 horns


Evap Canister


st162 AC compressor with lines & belt


st162 AC Evaporator


st162 3sge Injectors


st162 3sge upper and lower stock airbox




Cam gears (cams were sold)


Practically brand new 3sge Water Pump (less than 500 miles)


3sge Coolant neck w/ sensors (missing both BVSVs)



3sge Coolant lines


3sge Fuel Rail


Brand New Vibrant Performance GESi #7225 Catalytic Converter 2.5'' In/2.5'' Out and Flex joint (Got this from website where they didn't tell me it's illegal in California)


3sge Power Steering Pumps


3sge S53 Transmission (2nd and Reverse Syncro a little rough like usual) with Release Fork *Local Pick up preferred*


3sge Flywheel including bolts (Needs resurfacing)


T-VIS intake assembly (missing 1 of the flaps. Might the root cause of my engine failure)
includes vacuum/electric modules



3sge Engine Head (damage in cylinder 2; Needs to be taken to machine shop for resurfacing and repairs)
includes shims, springs, valves, cam brackets, 9 Head bolts (1 was stripped), misc. bolts for cam brackets (2 were stripped) Going to look for those bolts so you can get a complete set.


1

2

3

4


Oil Pan



Oil Strainer & Baffle Plate
Crankshaft Main Bearing Caps & Bolts


Pistons & Rods

Damaged Piston 2 is 2nd from the right


Battery Box



3sge engine/transmission plate


NEW JDM 3sgte Exedy OEM Clutch Cover, OEM Clutch Disc, and OEM Release Bearing (Sold as a Kit)




BEAMS 3sge Intake manifold and Engine cover (set)





BEAMS 3sge SARD Sport+ Intake



Misc. Engine Brackets (spot the one you want?)

 

Re: bunch of st162/5 and 1st gen 3sge parts for sale

Prices are posted. Let me know if you still want them.

Prices are posted. I'm selling both mirrors whole.

 

Re: bunch of st162/5 and 1st gen 3sge parts for sale

:hehe you could cancel your order and save 65 bucks by buying it from me :mrgreen

Each headlight set up that I bought was a step up from the previous.
Personally I liked the Bi-Xenon because I had HID low and high beams with the crystal Raybrigs.

I can't use them anymore because I have custom crystal projectors now which use H7 HIDs and
they don't have high beam. Plus I won't have any trouble with the cops unlike with the Raybrigs.

 

Re: bunch of st162/5 and 1st gen 3sge parts for sale

Yes they do
The Head has the number: 11111-88381
Both Cams have the number: -88360 closer to the cam gear end and a 4 closer to the distributor end.

 

Re: bunch of st162/5 and 1st gen 3sge/gte parts for sale

The wheel has the usual wear but with less cracks. In the picture it had this steering wheel cover to prevent cracks on the actual wheel. Also Cruise Control does NOT come with it. However It DOES have the space for the buttons to run the cruise control (if you have it)

 

Re: bunch of st162/5 and 1st gen 3sge/gte parts for sale

Here some photos w/out the cover

They are 4300K and they look white and not yellow at all.
Shipping would be 9.35