1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Parts wanted

Discussion in 'Parts Wanted' started by fernandocelica, Jun 16, 2011.

  1. fernandocelica

    fernandocelica Well-Known Member Donated!

    Celica JDM 89 ST162 L/Rear Taillamp,R/Front door Hinges Upper & Lower.
     
  2. Redrkt01

    Redrkt01 Well-Known Member

    I have the rear taillamps and lenses for a hatchback. Do you still need a set?
     
  3. fernandocelica

    fernandocelica Well-Known Member Donated!

    Hi yes I still need them can you maybe just send photos of them so we can have a look at them.And what would your price be on them?
     
  4. trel162

    trel162 Well-Known Member Donated!

    Re: Parts wanted - door hinges

    RHS door hinges - left is Top right is Bottom, this what you need?
    [​IMG]
     
  5. fernandocelica

    fernandocelica Well-Known Member Donated!

    yes I need both but I see the top right is not in good condition it's got a bolt on it
    it's been mod it must look like the bottom one with a stud.i still need them if you can find one's that still good they must have no play (on studs)
     
  6. trel162

    trel162 Well-Known Member Donated!

    Just had a look at my car and the other spare door, you're right, this is the only one with a bolt. Got it off a parts car, don't know the history of it.
    Neither hinge has play, both tight and smooth.

    See how ya go, it seems to have worked fine on the parts car.
     
  7. Seank90

    Seank90 Well-Known Member Donated!

    i have?
     
  8. fernandocelica

    fernandocelica Well-Known Member Donated!

    alright do you have them both and I much will it cost me if you have to send them to south africa
     
  9. fernandocelica

    fernandocelica Well-Known Member Donated!

    trel 162 thanks for your efferts lets if seank as the right stuff and if they are still fine
     
  10. trel162

    trel162 Well-Known Member Donated!

    No worries, i'll still have the good bottom hinge if you need. Good luck
     
  11. Seank90

    Seank90 Well-Known Member Donated!

    i just have to check my parts car and ill let ya know!
     
  12. fernandocelica

    fernandocelica Well-Known Member Donated!

    ok thanks will wait for u
     
  13. ST165-2765

    ST165-2765 Well-Known Member Donated!

    I don't know if your still looking or not but if you are I can get you
    the passenger side door hinges, nice and solid, proper pins and
    no play in the hinges at all, and I can get you the basic taillight you
    need if you have the orange insert. If you don't have the orange insert
    I'll give you a pair of red inserts for free or I can include a pair of the
    orange vents but they go for $50 a pair.

    I'd do the hinges and taillight for $40 plus shipping if you just want the
    red lens.
    [​IMG]

    [​IMG]
     
  14. fernandocelica

    fernandocelica Well-Known Member Donated!

    yes st165-2765 I am still looking for the hinges it's got to be R/H door I suppose in our case Passenger side
    I already bought the taillight which I am still waitng for.Paid $60 inc shipping it's now been 3 week's also from canada maybe there is some thing else you can help with on the rear it 's a no: holder where the no: mounts on too and there is lights on both sides and then what will your price be it's a pitty we did't deal from the start it was my loos your price's are
    cheaper
     
  15. eNtraxGT88

    eNtraxGT88 Well-Known Member Donated!

    i shipped it two weeks ago (there was delay because of the whole address issue, they charged me TWICE for post, so i had to work it out with them before actually sending it) they said it would take 4-6 weeks.

    sorry for taking so long :S
     
  16. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Okay the best way to get the propper hinge is engine side or tranny side as they don't change whether its left hand or
    right hand drive. As far as I understand its engine side ?

    I do have extras but it all depends on the size of your licence plate. All North American ones look like the
    one in the following picture and will fit a licence plate up to about 30.5cm wide I'd swap it for the light
    and go $20 if you can use it
    [​IMG]

    This is LionTR's car from Hungary so I don't know what yours looks like
    [​IMG]

    Anything else you need may as well get it now and save on shipping, I do have quite the extensive parts collection
     
  17. fernandocelica

    fernandocelica Well-Known Member Donated!

    It's like the US one but let me confirm on that first at work tomorrow and you right I will check for other small
    Item's I need and take photos of it then we can take it from there thanks hinges will be right side my car is RH drive so yours will be passenger side thats the one's I need
     
  18. fernandocelica

    fernandocelica Well-Known Member Donated!

    thank's Marcs at least now I Know will wait another two week from now
     
  19. fernandocelica

    fernandocelica Well-Known Member Donated!

    here are photo's of what i need:[​IMG][​IMG][​IMG] with that I still need the hinge's and ashtray on rear consol one more thing i forgot to take photo of cabyhole lacht don't worry about the key
     
  20. ST165-2765

    ST165-2765 Well-Known Member Donated!

    cabyhole = glovebox ?
    storage compartment in front of passenger built into the dash
     

Share This Page