LAST UPDATED: 4/23 This is just a quick reference for the aftermarket parts and maintenance parts available for our ST162/ST165. I’m hoping that this will help new visitors/members on our forum get their car going if oem replacement parts start disappearing off catalogs and discontinued at the stealerships. PLEASE FEEL FREE TO ADD TO THE LIST BY REPLYING TO THIS THREAD WITH A LINK! Also let me know if any of the links don't work! EDIT1: I do recognize that most of these links are better suited for North America in terms of item location/shipping, however, feel free to post your links as well as hopefully this thread will evolve to have all parts available. COOLING: [EBAY] ST165 Autopwr 42mm 2 Core Aluminum Radiator (fits fwd ST162 by blocking off turbo line) [SITE] Koyo Radiator (good for all FWD, including automatic trans oil cooler) [EBAY] ST205 Silicone Radiator Hose (fits all 3S 4th gen by trimming 1-2 inches off the top hose) [SITE] or [SITE] Water Temp Switch (the one on the thermostat housing; if your rad fan is always on -- see thread here) [SITE] Temp Gauge Sender (if your temp isn't working) ENGINE: [SITE] K&N Drop-in Panel Filter [SITE] CASE OF 10 OEM Toyota Filters [SITE] ARP Stud/Bolts for Flywheel/Head/Main [3SGTE] [SITE] DENSO OEM PQ16R Spark Plugs [3S-GE] [SITE] DENSO OEM Spark Plug Wires [3S-GE] [SITE] NGK TX06 Spark Plug Wires [3S-GE] [SITE] NGK BCPR5EP11 Spark Plugs [3S-GE] [SITE] Engine Mounts (select either front/rear/side and auto/standard trans) [SITE] Polyurethane Front/Rear Engine Mounts (standard trans only) [SITE] Crossmember Aluminum Bushings (front/rear) TRANSMISSION: [SITE] Shifter Base Aluminum Bushings [SITE] Shifter Linkage Brass Bushings BRAKES: [SITE] Stainless Steel Clutch Line SUSPENSION/WHEEL: [SITE] ARP Extended Lugs [SITE] This one has a lot: - KYB Front GR2 Insert PN: 365064 (1988-1989) - KYB Front AGX Insert PN: 765015 (1988-1989 -- can fit in 1986-1987 with modifications) - KYB Rear Left GR2 PN: 235029 - KYB Rear Right GR2 PN: 235028 [SITE] KYB Front GR2 Insert PN: 365058 (1986-1987) [EBAY] Koni Yellow Full Insert Set (Thanks to jwagner for PN#s) [SITE] Toyhead Swaybars/Lowering/Camber Kits/Caster Kits (scroll down) [SITE] Toyhead Polyurethane Bushings for Control/Trailing Arms, Swaybar Links, and Tie Rod [US SITE] [AUS SITE] Whiteline Control/Trailing Arm Bushings, Sway Bar Bushings, Tie Rod End, Camber Kit [US SITE] [AUS SITE] Whiteline 22mm Front Solid Sway Bar with Poly Bushings [US SITE] [AUS SITE] Whiteline 18mm Rear Sway Bar with Poly Bushings [AUS EBAY] King Front Lowering Springs 30mm [AUS EBAY] King Rear Lowering Springs 30mm [SITE] or [EBAY] B&G Lowering Springs Set 1.6inch (FWD) [EBAY] B&G Lowering Springs Set 1.6inch (AWD; possibly a different spring rate for the rear, but no confirmation) EXHAUST: [SITE] DENSO O2 Sensor [SITE] Walker O2 Sensor [SITE] Toyhead 4-1 Header (3S-FE, de-cat, no O2 flange; may need fabrication for rest of exhaust)
