Hi guys,starting the BEAMS redtop swap into my 162,electrical question though,what is the voltage feed for the clocks,so we can sort the loom to make the tacho etc work. BEAMS ss3 clocks run on a 12v ECU feed,the problem the st202 guys have when they do this swap seems to be the 202 runs on a 5v feed.I know Omar used a Dakota unit to convert his,but before we go down that sort of route it would help to know the voltage a gen4 uses for its clocks.Assume its not 12v or there would be no need for a converter... thanks Sherv