1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

FPR problem?

Discussion in '3sge' started by Stig, Feb 26, 2012.

  1. Stig

    Stig ST162 Guru Donated!

    Finally got round to fitting my SARD FPR

    Yep, that's it running, revs out ok etc


    This morning the cold idle was all over the place, hunting up and down
    I opened the bonnet to see the pressure at 60psi so I turned it down to 40psi.
    Idle became normal and no further problems on the way to work

    This afternoon on the way home my idle went awol, I got home and the pressure was 20psi so I've adjusted it back up to 40psi

    What's going on? how do I make it constant
    Last edited: Mar 6, 2012

Share This Page