1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ERROR 22, WHIC SENSOR IS THAT

Discussion in 'Forced Induction' started by Rio_Cyber, Jan 11, 2008.

  1. Rio_Cyber

    Rio_Cyber Guest

    brown on the elbow ?
    swich on the termostat housing ?
    water temp gauge ?

    where coul be the source of error elswhere ?

    thx ....

    any connection with csome vsv posibbly ?
     
  2. Mafix

    Mafix Owner Staff Member Administrator Donated!

    not the gauge or the 1 wire sensor in the elbow. there should not be a sensor on the thermostat housing. i don't think it is the sensor in the bottom of the rad either.

    i wonder does the gauge work?
     
  3. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Its on the elbow under the oil pressure sensor.

    Does your temp guage work?
     
  4. MITT4G

    MITT4G Well-Known Member

    I found that the oil pressure gauge has a small spiral wire setup that will short out and burn the casing and wires causing the gauge to malfunction.
     
  5. Rio_Cyber

    Rio_Cyber Guest

    the gauge arre working, i have trouble starting the car + rad fans constantly on.. :mad:
     
  6. Mafix

    Mafix Owner Staff Member Administrator Donated!

    that would be the one in the bottom of the radiator.
     
  7. Rio_Cyber

    Rio_Cyber Guest

    i have a 87 gts without radiator senzor, i have it on the thermostat housing... btw i think that the wire has lost the connection somewhere, is there any ewd metion of that circuit so i can try to track down the problem ....

    txh..
     

Share This Page