1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

bolt-in injectors

Discussion in 'Forced Induction' started by hatharry, Oct 13, 2011.

  1. hatharry

    hatharry Member

    im looking for some high cc bolt-in injectors for my 2nd gen 3sgte any one know of any?
     
  2. Mafix

    Mafix Owner Staff Member Administrator Donated!

    yep, sard makes plenty
     
  3. Stig

    Stig ST162 Guru Donated!

    Sard, Bosch, ND etc

    Check the injector listings for more info, what size are you wanting?
     
  4. hatharry

    hatharry Member

  5. Stig

    Stig ST162 Guru Donated!

    What boost is that for?

    Be wary that running rich may prevent detonation but causes "cyl wash", ie all the oil is washed from the cyl walls and the pistons seize up.

    Another alternative is an adjustable FPR which if used correctly can do the same job
     
  6. hatharry

    hatharry Member

    mods on top of that would be a gt30 turbo running around 15psi. i have a standalone ecu so with proper tuning its not gonna be a problem
     
  7. Mafix

    Mafix Owner Staff Member Administrator Donated!

    i'm not too familiar with side feed injectors.
    there is always the option of checking wolfkatz
     
  8. brutekiller787

    brutekiller787 Active Member

    Ditch the side feed. An st165 rail with bolt to a 2nd Gen head with almost no mods. Much larger selection of injectors available for top feed.
     

Share This Page