1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

46 trim turbo

Discussion in 'Forced Induction' started by esraceing, Aug 8, 2007.

  1. esraceing

    esraceing Well-Known Member

    i sent my stock ct26 out to majestic turbo for upgade
    46 trim,t04 e wheel with 7 deg clipped and supra exhaust housing.
    they said it can put out 350 hp to the wheels with the rite upgades


    ps; willy shes guna rock :twisted:
     
  2. Mafix

    Mafix Owner Staff Member Administrator Donated!

    interesting. why the 7degree clip? i'm kinda new to clipping. and why only a 46 trim? that's really not much bigger than stock.

    i scored a 50 trim that i'm mating to my ported exhaust housing. should be nice.

    another thing, since when were you allowed an upgrade to the turbo? or does that only apply to having the *stock housings?
     
  3. 1fstgts

    1fstgts Well-Known Member Staff Member Administrator Moderator Donated!

    Im kinda curious this as well. How much did this all cost anyways?
     
  4. esraceing

    esraceing Well-Known Member

    clipping the exhaust wheel helps the exhaust get out better.
    price is around 850 for all of these upgrades.
    yes as long as its in a stock housing

    46 trim is 1/2 inch larger then stock.2.06 inch stock is 1.55 inch
     
  5. Mafix

    Mafix Owner Staff Member Administrator Donated!

    heard i got an upgrade and had to keep up eh? just kidding!
     
  6. esraceing

    esraceing Well-Known Member

    WELL YEAH, i was planning on this for a long time
     
  7. 1fstgts

    1fstgts Well-Known Member Staff Member Administrator Moderator Donated!

    850? wow that seems a little high. Maybe prices have gone up since I had mine done. I had a full rebuild plus the 60:1 done, I dont think they clipped it to 7 maybe 4 Id have to dig out my paperwork. Anyways it was only 600. But then again this was going on 2 1/2 years ago. turbochargers.com did mine.
     
  8. esraceing

    esraceing Well-Known Member

    ok its here ! i just installed it on friday at work and its working very nice
    price was 775 shipped .
     
  9. MITT4G

    MITT4G Well-Known Member

    "CLIPPING"- what does that involve cutting the blades???
     
  10. Mafix

    Mafix Owner Staff Member Administrator Donated!

    turning i believe.
     
  11. MITT4G

    MITT4G Well-Known Member

    What turbo has a 50 trim=- better yet wtf is a 50 trim?
     
  12. Mafix

    Mafix Owner Staff Member Administrator Donated!

    intake wheel size
     
  13. MITT4G

    MITT4G Well-Known Member

    Willie are you still running your ct26 modified our did you upgrade the Turbo ??

    But from what I read the ct26 exhaust housing dosent let out enough gases to work at higher rpms, so getting a bigger trim- wont that hurt performance- how does yours do half way down the track does it still have a good pull to it??
     

Share This Page