Separate names with a comma.
Slow around here these days...I've now got 225/45-16 Z2 Star Specs on a set of old 16x7 5Zigen div.3s at stock ride height for now and a little...
If you're referring to the three bolts that hold the ball joints to the control arm, you're not really changing anything that matters by doing...
I've attached the DXF of the hatchback rear shelf in zipped form to keep the site's attachment manager happy.
Thanks. I've tweaked the drawing to fix the gotchas but I haven't actually cut a new one with the revised drawing, I'm planning just to use the...
Was waterjetting some other stuff so I took along a piece of 3/16in ply I had laying around. Results attached. Got a couple of the...
Current state of affairs, if anyone cares, first pass at the drawing is done, rendering below is from a dimensioned drawing. Needs...
A little different approach... I'm in the process of translating my crumbling '86 hatchback deck into a CAD drawing, and when that's done I plan...
What color's the interior and what's good/bad inside?
Just in case anyone is actually looking at this thread anymore... From a quick peek under the car it looks like: a) The stock ball joint is...
Exhuming the thread here... Spacing the control arm down from the ball joint does not change the geometry, the effective control arm is from the...
And the answer is...Spain. One of my Amazon Monroes came in a Sensatrak box, the other in an OESpectrum box, but in every respect other than...
Front GTS calipers and '88 MR2 rotors (same size as GTS but 4-lug) are on and work fine. Didn't have GTS splash shields and wouldn't have wanted...
The GTS front calipers and '88 MR2 front rotors are now on my ' 86 ST161 GT. Works fine. Cut off the splash shield, as (a) it wouldn't clear...
Forward weight transfer is a function of a fair number of things, including CG location (fore-aft and height). suspension geometry (particularly...
FWIW rear-disc Civics of a decade or so ago had 30mm pistons and integral parking brakes, I think the Saturn SC of similar vintage was 32mm, Ford...
Hmmm...interesting. I recently dragged home an '86 GT that hadn't run in 16 years as a beater. I found a set of 15x6 Miata wheels and 205/50...