im considering putting together a bulb guide for our car but im having a hard time finding what the bulbs in the liscense plate lights are and the map light bulb in cars with a sunroof. anyone know?
The license plate bulbs are type 89. Here's a pic of some info I downloaded years ago. North American Celica convertible Center High Mount Stop Light bulb is type 922.
ST162 Bulbs *indicates LED/modern replacements for above item **indicates LED/modern replacements for all above items in category H6054: 2 – Headlights *7x6 200mm H4 Housing H3: 2 – Foglights (GT-Four/Alltrac) 1157: 2 – Front Parking Light/Corner Turn Signals (USDM) 4 – Brake Light 1156: 2 – Front Corner Turn Signals (JDM/EDM) 2 – Rear Turn Signals **LED not recommended (causes hyperflashing) 2 – Reverse Lights *18SMD 1156 (requires SMDs all around the side for even lighting) 1 – High Mount Stop Light 194/T10 Wedge: 2 – Front Trim Sidemarker 2 – Rear Sidemarker 2 – Rear Trim Side Marker (Coupe) **LED not recommended (normal bulbs are better/more spread out due to small lens) 2 – Front Parking Light (JDM/EUDM) * 4SMD T10 or 1SMD T10 (any front facing one) 4 – Instrument Cluster Illumination * 5SMD T10 (avoids hotspots) 4 – Instrument Cluster Turns/Highbeam/Fuel level *LED not recommended for these esp. Fuel Level) 2 – License Plate Light (JDM/EDM) *5SMD T10 (avoids uneven lighting) 89: 2 – License Plate Light (USDM) 74/T5 Wedge: 1 – Glove Compartment 1 – Key Ring Illumination 9 – Instrument Cluster Warning Lights **1SMD T5 DE3175: 1 – Dome Light *31mm Festoon White DE3022: 2 – Door Courtesy Light *31mm Festoon Red *31mm Festoon Any color if you take the white transcluscent lens from the trunk 1 – Trunk/Cargo *31mm Festoon White Twist-lock (Not sure of size yet): 1 – Emergency Lights Switch 1 – Defroster button 2 – HVAC Panel
anyone know what the bulb in the map light on the sunroof control is? Mine doesnt have any markings on it and i would like to convert it to LED.
i forgot that bulb...damn! what i did was take a festoon LED, twist the metal so it holds that in place. make sure you electrical tape anything that may short out. it worked great for me for the 2 years i had it
Am looking at replacing HVAC backlights with T3 Neo wedge. Seller has warning on their site that vehicle fitted with CANBUS will need resistor mod. Does anyone know if this is the case with 162s?
I tend to check this site out: http://www.superbrightleds.com/cat/...-bulbs/vehicle/1989-toyota-celica--/62-341--/ Served me well so far, might have some info for your guide.. Pictures are always awesome, too
boot/ trunk Light I cant for the life of me find a light for my boot/ trunk. Is it possible there isnt one or can someone direct me to where it is supposed to be? Its a convertible, but wouldnt have thought that makes much difference.
Mines on the opposite side of where the number plate is - on the "inner" wall, directly down if you we're looking into the boot from the back. It has a little toggle switch, doesn't light up with the boot lid. 89 hatch. If you're struggling to find it, sounds more likely you don't have one... I think it'd be hard to miss
Thanks, looks I dont have. Am now looking for some constant power down that end to instal one. Thanks again