1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thermofan wiring-THermistor help

Discussion in 'Electronics' started by dan1_721, Apr 14, 2008.

  1. dan1_721

    dan1_721 Guest

    So its all figured out!

    Was thinking at the same time,im gona see if i can use the positive ac trigger to actuate the A/C VSV on the firewall, since it wont work after swapping several, im thinking that is a wiring problem again, and all the vac hoses are fine. Just gona get a 12v and ground and see if i can get it to actuate, if so il trigger that off the ac trigger too. Cheers man!
     
  2. cannon

    cannon Guest

    yeah no worries good luck with it use a multimeter to check to see if theres continuity across the thermistor when the car warms up and make sure that there is no continuity when its cold also. if not it doesnot function like it should. i would also check that the ac wire on the ecu is working also with a multimeter see if it sends any voltage when you turn on the a/c check these before you wire anything up make sure everything works properly first
     

Share This Page