1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help!! St165/st162 sx loom wiring for jdm dash

Discussion in 'Electronics' started by GazModz, Jun 24, 2012.

  1. GazModz

    GazModz Active Member Donated!

    Hey Guys, just wondering if anyone knows how id go about merging the two looms together? i have the top dash/radio loom from a st165 (actually came out of ST162COUPE's old beast) and im trying to use it with the 85 SX st162 loom, there is just one plug that wont match up though =[

    is it as simple as just joining the wires together with there corresponding colors? or did toyota use some of them for different things?

    im still new to these Celicas, so any help would be great guys =]
     
  2. Seank90

    Seank90 Well-Known Member Donated!

    Photos of what your trying to do would help so we all know what plugs your mergeing
     
  3. GazModz

    GazModz Active Member Donated!

    Ok :) I'll post some pics tonight after work.
     
  4. Stig

    Stig ST162 Guru Donated!

    JDM dash is the same except for 180km/h speedo, but JDM's also came with retracting mirrors and no dimmer switch.

    From memory the ST165 has an extra ecu/relay above the glovebox, is that what you refer to?
     
  5. GazModz

    GazModz Active Member Donated!

    I'll try and upload some pics in about an hour, on the train home from work, I have a feeling its a st165 dash.. Tried it on my st162 SX loom and I got weird messed up things going on haha,
     
  6. GazModz

    GazModz Active Member Donated!

    FINALLY GOT NET BACK....... all good guys, figured it out, the loom i was looking at was the power mirror loom on the right hand side (drivers)....
    also, just had a closer look at the jdm dash, and there appears to be a nastly burnt trace on the ign+ line =/
     

Share This Page