So a buddy of mine gave me some random stuff he found in the garage of a house he bought. He had no use for them and knowing im a Celica guy, asked if i wanted them. First is a set of Eibach lowering springs, no box but a piece of masking tape says "91GTS" so im assuming they are for a 5h gen. Also he gave me a box of 4th gen trim pieces, the black panels off the rear pillars on an 86 coupe and some emblems. He also gave me a stainless steel exhaust system. It appear to be from a celica but i have no idea which generation. Its in pretty good shape and with some cleaning would shine up nice again. So heres my questions. will the lowering springs fit a 4th gen and would a 5th gens exhaust( if thats truely what it is) bolt on to a 4th gen? My Alltrac already has some nice 3 inch exhaust but its just steel, the stainless would be a nice upgrade. Even if its off of a non turbo, it bolts just after the flexpipe so i think it could possibly fit.
iirc, the fwd exhaust routes above the lower control arms of the rear passenger side wheel, i'm guessing through were the rear axle would poke through. not sure about the 5th gen, but most definitely for the 4th gen fwd
