Separate names with a comma.
Hi guys haven't been hear for a while. The problem i have is when the car is ticking over it's fine and revs up to the limiter but under load it...
Hello guys. I have a problem with my 165. I have just replaced the pistons and rings as 3 of them had ringgland problems. Now it's all back...
Guys i have a problem with the 3sgte. Been trying to sort out why she is smoking through the exhaust. I have a brand new turbo which has done no...
Guys i have a gauge that reads lean, optimal, rich, not digital. On tick over it reads from the top side of lean to mid range of optimal., At part...
Anyone know if the de-cat pipe for the 185 will fit the 165. I have found a few companies with them and they are advertised for fitting the 165,...
Guys would it be possible to use the air con rad to cool the intercooler as i am doing away with the A/C on the 165. Thinking the rad is much...
What pressure do you guys run, I have just ordered a manual adjustment with gauge for the gt4 Also i see a lot run dump valves on hear and...
Any one have any idea what could be causing my boost problem ? When she goes to boost their is a slight hesitation then it's fine and this...
What is the pros and cons of having the cooler running all the time. My 165 was bridged when i got her
Just thought i would share this pic of my collection of Celicas [IMG]
St165 door lights and dash warning light for the door open light staying on I have took the bulbs out of the doors to stop the battery going dead...
Guys what is the best plug for the 165.'? I have always used NGK, When i got the 165 she had Bosch plugs in and she was miss firing. Putting it...
Quick question is where should the actuator be plummed in to. Mine has been disconnected and has a by pass valve put in. Should it be to the...
As above guys going to swap the AFM on the 165 to the 205 set up. Anyone done this or a guide of what is involved and parts needed to complete the...
Guys i know it's simple to swap the recirc valve for a blow off valve but how dose the set up work in that the air released by the bov has just...
Any one know if the st185 3sgte exhaust manifold will fit the st165 3sgte like the 182 fits the 162 Also the CT25 Turbo. I have chance of both.
OK guys bit of a problem looking for some advice. Striped the gt4 to put a new crank and bearings in her got her all back together but she wont...
Has above guys looking for the vacuum diagram for the 1989 gt4 A complete diagram would be great,
Hi guys would anyone know the torque settings for the crank shell bearing caps main and connecting rods, Please its the 165 turbo 3sgte thanks
G4cel gt4 Now the owner of this stunning st165. She needs engine work but nothing i can't do myself . Hopefully she will be up and runing for...
