Separate names with a comma.
Sorry Lone wolf can't do it with out the dash in front of me and as I have covered mine up I dont have a pattern but if you follow the...
It isn't from a specific car. Just measure the gap in inches as that is typically what they are measured in. I got mine from a local speed shop...
Good job keep at it. Is it a Corona or a Celica?
Yep changed to stainless braided lines. As much as the vents are massive they let out so much heat that I would struggle without them I reckon. So...
So an update is WELL overdue. Finally got all the electrics working again. If there is one thing I have learnt from this build it is to never...
I'm interested too! Still doing them?
I think the engine loom is sorted but not sure where we are with the car loom? Do you have any idea about where I could get a At162 manual heater...
I go to the track a fair bit and the two most common problems are; 1, Overheating brakes. Which I solved for a little while with some Mintex 1166...
Added some Radiator ducting. [ATTACH] The right side [ATTACH] The left side [ATTACH] Both sides [ATTACH] The top piece in. There is a...
So a little update. I needed a fuse box and of course I didn't want stock stuff! I wanted all the fuses and relays in ONE place but where to put...
Thought you and the guys following this thread could find this worth a look,...
If it is an ex Gt4 gearbox this might help? http://gtfour.supras.org.nz/gearboxpics.htm I severely doubt it was a Gt4 box though the internals...
Well by the time I get the 205 brakes to fit under the 15" wheels the disc diameter is too small to be worth it. I have some 16" wheels and they...
No it's not dead yet!! I am getting my wiring done at work by my boss as and when he can fit it in, so you know how those stories go......S L O W...
Once you've swapped them if you can get quote that would be cool but if you cant be assed I understand!!
Have you still got your manual window mechanisms and door cards? I could be interested but shipping could be a killer to New Zealand?
If you look at how I did it in my earlier posts you could feasibly do it out of other materials. Wood,fibreglass, even cardboard could work. Have...
Update time, First the dash. Back from the upholsterers. [IMG] Short black suede with red stitching [IMG] With the gauges in place [IMG] My...
I decided to add a proper swirl pot to go with my breather tank previously fitted, (post 62 above), I incorrectly called my BREATHER/BLEED tank a...
Sorry fernando not South African, Kiwi born and bred. Not sure what you mean lone wolf? Did toyota put one on and I binned it when I stripped the...
