Hi! Looking for the bolt, casing and washer/nut for the rear, inner suspension arm on my 1986 Toyota Celica on both sides. If you've got spare bolts, washers and nuts for the rest of the rear setup I'm interested in those also. Part numbers in image: 48452R, 48409, 48703E.
That's not for camber adjustment, it's for toe. If you want to adjust camber on the rears, you have to get camber adjust bolts that has to be replaced to one of the strut bolts on both sides.
I have a used set of those from my GTS. Here is what I'm replacing them with, so just let me now if you want them? Here is an image comparing new setup to old.... racerb :science2
Racerb, PM sent. Would these fit, or am I way off...? :wink http://www.fensport.co.uk/Parts/Model_11/Category_2/3089
Those will fit at the hub to strut mounting point, the adjusters I have are inboard for setting the rear toe. If you need to adjust camber, then these parts would work just fine!! racerb :science2
