my celly isnt closing the throttle plate fully if i accelerate slowy if i accelerate it manually itll work fine if i use the pedal and baby it once i let go the throttle plate sticks party open i cleaned out the throttle lubed the throttle return spring and its still acting up does the cable have an adjustment procedure or do i just replace the cable pedal is feeling alil stiff any suggestions opcorn
Lol mine sticks as well. But as you said all it needs is a tap or a bit more than a tap sometimes and it's back to normal. I too would like to see the solution to this.
Add some lube to the kick back spring, try that and let us know what you get, also you can take a look at the screw that holds the spring and plastic roller (under the spring) just make sure there's nothing binding.
im gonna try those things to be sure sounds like a common issue ill let you guys know what i come up with
-take the cable off the t.b. assembly and see if the plate closes all the way and has no binding when moved by hand. if it does then the issue will be either be a bad or mis-adjusted cable or something in the pedal assembly. if it doesnt close all the way then you should be able to adjust the t.b. screw so it does. -sounds like its likely a worn cable, or just needs adjustment.
I got it well i forgot to say its an automatic with cruise control so i decided to rip the plastic black cover to realize there was another set of kris cross pulleys which when i tried to pull with my hand it was really tight i sprayed it down like 10 times with some gunk lube oil and the problem resolved thanks for all the suggestions hope this can help someone else